Position: Hangzhou Qirui Tools Co.,Ltd > News > 2011 > Chipper teeth

Chipper teeth

Updated: 2011-08-12 14:33:00

 Chipper chain invented by Joseph Cox improved dramatically on the performance of scratcher chain. Chipper used a tooth that was curled over the top of the chain, with alternate teeth pointing left and right. Ahead of the tooth was a depth gauge, which allowed for good clearance around the tooth for chip clearing while limiting the depth of cut and preventing grabbing or overloading. Chipper chains are still available from Carlton and are sometimes used for dirty work, since their very large working corner allows the cutter to retain its effective sharpness for a long time in abrasive conditions.