How to use chain saw guide bar reasonably

　　How to use chain saw guide bar reasonably? What are the precautions for use?

　　When using the chain saw guide bar, everyone must pay attention to the reasonable use. How can we use this product reasonably, what should we pay attention to?

　　First, add oil

　　In the process of using the chain saw guide bar, the oil should be added according to the actual situation. The advantage of this is to provide enough lubrication for the entire product equipment. It is necessary to effectively reduce the heat generated by the friction between the chain and the product, so that the entire guide bar can be protected to a certain extent, and at the same time, premature scrapping can be avoided.

　　Second, check the filter

　　When the equipment is in use, if there is some refueling and stalling or it is not so exciting when it is working, it may be a problem with the filter. It is recommended that you check the filter before working. After the filter is clean and qualified, observe the sunlight to see if the surface is transparent and bright, or it is unqualified.

　　Third, perform maintenance after use

　　After the chainsaw guide is used, it must be maintained in various ways. In the maintenance process, you can choose the most suitable maintenance method based on the actual situation, but you must ensure the work efficiency.

　　What should I pay attention to when using the chain saw guide bar? The above three things are more important. In addition, if the saw teeth become not particularly sharp, you can use a special file to trim the surface of the saw teeth.